DETAILMAX®
FAB MAX Fabric Coating
DETAILMAX® Fabmax Fabric Coating is a NANO clear liquid that forms a STRONG POLYMERIC FILM on the surface and boosts Hydrophobicity.


FAB MAX

FEATURES
Specialty Care
Stain, Dirt & Water Repellent Fabric Coating! DETAILMAX® Fabmax Fabric Coating 500ml for all types of Fabric, Suede surfaces & Canvas Roof. It is water, dirt, and liquid repellent & does not damage the fabric texture.
DETAILMAX® Fabmax Fabric Coating is a NANO clear liquid that forms a STRONG POLYMERIC FILM on the surface and boosts Hydrophobicity.
Coating Application After Cleaning:
Any Car Detailer or Detailing Enthusiast can easily apply on any Fabric & Suede surface. Just spray it on the Fabric Seat & other Surfaces and leave it. No wiping or buffing is required.
Curing Time:
TACK FREE Curing time of 1 Hour, and a FULL Curing time of 24 Hours.
Layers Recommended:
1 Layer. If needed, repeat the application process.
Shelf Life:
Has a shelf life of at least 12 months when stored between 0C and 25C in the tightly closed original container. After opening – must be used within 180 days.
GROOMING
CARS WITH A
PERSONAL TOUCH
APPLICATION
Detailmax: Your Car's
Best Care Companion

Wash the Vehicle
Thoroughly clean the vehicle using a high-quality car wash shampoo to remove dirt, grime, and contaminants.

Decontaminate the Surface
Use a clay bar and lubricant to remove embedded contaminants from the paint surface.

Prewipe
Spray on the Panel and Microfiber, and wipe to remove oils. A clean Microfiber cloth should be used forcefully to clear the oils from every inch.

Application of Ceramic Coating
Apply a small amount of the coating to an applicator pad and work it into the paint surface using overlapping, straight-line motions.

Work in Sections
Divide the vehicle into manageable sections to ensure thorough coverage.

Buffing and Levelling
Use a clean, dry microfiber towel to buff and level the coating after applying the ceramic coating. Buff time in 5-10 seconds

Cure Time
The car can be delivered after 2 hours of application. For best results, allow the coating to cure for 12 hours before delivery.